SHARE

Explained

What is a Wall Light?

Maximum style with a minimal footprint

Written by Gantri Editorial Team

Sep 06, 2020

Carve Wall Light by Ammunition

Wall Lights are lights that are hung on a wall of your home, office or commercial space. They are typically chosen over Table Lights, Floor Lights or Task Lights because they can be floated instead of on a surface you could otherwise use in a more productive way. While traditional Wall Lights are often restricted to preset electrical wiring, modern Wall Lights like Gantri’s Signal Wall Light, Gio Wall Light and Carve Wall Light can be plugged into an outlet and mounted wherever you desire.

Traditional Wall Lights are also often clunky. Despite the fact they are usually wired into the wall, traditional Wall Lights often protrude as much as ten inches. Contemporary, sustainable Wall Lights like ours have sleek plugs that will not affect your furniture placement and have shapes that will not protrude too far into a thin space like a hallway or entryway.

Issues with traditional Wall Lights

Time-consuming to replace

Most traditional Wall Lights are mounted in place and are wired through the wall, making exchanging one light for another a tricky operation. Many homeowners avoid updating or replacing old-fashioned Wall Lights because they are hardwired, painted in place, and controlled by pre-installed light switches. Replacing a Wall Light can be draining, requiring a dozen or more steps including testing the existing wiring with a voltage meter and handling many small parts (nuts, bolts, screws, etc.). Replacing a traditional Wall Light, where the wiring has already been installed and attached to another light, takes around two hours work, while running a new cable and then installing a light could take three hours or more.

Bulky and difficult to move

Traditional Wall Lights extend past the wall in a way that limits where they can be placed within a home. For instance, a protruding Wall Light can be incompatible with foot traffic and entertaining because it can easily be caught on a backpack, purse or clothes. Traditional Wall Lights are also immovable. If you want to change the location of your Wall Light to match the new orientation of your couch, entertainment area or dining table, you must run a long cable from the existing wiring or call an electrician to help you establish the Wall Light’s new placement.

To make matters worse, you will also be left with a gaping hole and hanging wires from where you removed the light. Because of the difficulty in replacing or exchanging Wall Lights, you might feel that your options are severely limited. As a homeowner, you may choose to live with outdated, unattractive Wall Lights you dislike. As a renter, you may feel unable to update or add Wall Lights to your dimly or poorly lit space.

Outdated technology

Traditional Wall Lights often suffer from electrical problems more often than contemporary Wall Lights because of the way they are wired into the wall of a home. Bulbs that flicker or quickly burn out can be due to main service wire or main neutral issues. Lights that are hooked up to wiring that runs throughout the walls in your house can react dangerously to a bad connection.

Whether you try to troubleshoot this problem yourself or choose to call an electrician, fighting common electrical issues can be even more time consuming and frustrating than installing the light itself. Enough homeowners have struggled with this issue that converting a hardwired light fixture to one compatible with an outlet has become an increasingly popular DIY project, especially due to the fact that converting the wiring can take as few as five minutes once you get the hang of it.

Fitted with the wrong bulbs

Traditional Wall Lights are often fitted with the wrong bulbs, whether wrong for your home or the effect you are trying to achieve with your interior lighting. Many homeowners will stick with the original bulb used in their outdated Wall Lights even if the original type is not ideal for their situation. Choosing the wrong kind can cause bulbs to burn out quickly, resulting in wasted time and money replacing them. Using outdated bulbs can also improperly light a space, causing hotspots and other damage to illuminated artwork and emitting harsh or inaccurate light across a room (and the faces of your guests).

Traditional incandescent, halogen, and fluorescent bulbs all have drawbacks that modern LED bulbs do not. For instance, incandescent bulbs emit significantly higher amounts of carbon dioxide and are more harmful to the environment than LED bulbs. Halogen bulbs burn hotter than LED bulbs and can either burn out too quickly or cause a fire. Halogen bulbs are particularly disliked by art collectors and conservators because of the risk to art they pose. Fluorescent bulbs contain a small amount of mercury gas, making them difficult to dispose of safely and dangerous if broken. Traditional bulbs do not offer accurate color temperature, coming off too cold or too warm.

Our solution

Signal Wall Light by Ammunition

Space-saving lighting design

Designed with you in mind, Gantri Wall Lights can be placed virtually anywhere in your home or office, whether you own or rent your space. Gantri’s flat plugs are easy to insert behind furniture, preventing your couch, credenza, or nightstand from sticking out an inch or more from the wall. Gantri’s dimmable switch is also space-saving and more convenient, allowing you to change the intensity of your light without walking to the other side of the room.


Endless mounting options

Our Wall Lights offer an easy alternative to traditional clunky Table Lights. From a 400 square foot apartment to a multi-bedroom home, Gantri’s Wall Lights can be placed in a variety of different ways, including as a replacement for a pair of bedside lamps, near your bathroom door as a soft nightlight or in your kitchen for task-lighting. The Signal Wall Light by Ammunition, with its four-inch body depth and generous but soft outward facing light, is perfect for hallway lighting and can be placed in pairs on either side to illuminate your path without taking up too much space. The Gio Wall Light, with its downward facing light and sleek geometric body, offers a stylish replacement for nightstand lights but can also be mounted above artwork. The Carve Wall Light is slightly smaller and lighter than the Geo Wall Light, making it an excellent choice for small spaces like skinny strips of wall beside your bathroom or within your closet.

Easy assembly and installation


Hung with a single screw, our minimalist Wall Lights are some of the simplest to install. Our Wall Lights are also relatively lightweight and small, making them extremely easy to handle. Each Wall Light can be plugged into an outlet rather than requiring complicated wiring. The thin one-screw wall mount allows the light to be mounted flush to the wall without damaging plaster or paint or showing the hardware used in hanging. Our minimalist dimmer switch and subtle cord are never distracting, allowing you to hang your Gantri Wall Light wherever you wish without having to cover up unsightly elements.


Long-lasting elements


From their cords and plugs to their bulbs and body, all the elements of Gantri's Wall Lights are durable. They are each made from our Gantri Plant Polymers, which are the world's first plant-derived polylactic acid (PLA) blends engineered specifically for premium lighting products. Each Wall Light is also outfitted with a durable TPE cord, dimmer switch, and flat wall plug. Designed to resist damage and handle heat, our TPE cord can easily reach from your mounted Wall Light to outlets near the floor. Our plug’s sleek design makes it safer than other plugs that extend further from the wall because it is less likely to get caught on furniture, blankets, and other objects.

The Right Bulbs

Our ethically made eco-friendly Wall Lights are all fitted with industry-leading LEDs. They lack harmful chemicals, cost less over time, last longer and provide you with better color temperature accuracy. The LEDs we choose to install in each of our Wall Lights also emit a gentler light that is cooler to the touch, making them safer for illuminating your art collection, family photos, or reading space. Not only will LEDs protect your books from fading, art from hotspots and eyes from damage, but they will also last longer than other bulbs.

Regardless of your home’s personal style, its lighting needs or its size, Gantri’s Wall Lights offer everyone an easily installed, beautifully designed and durably created light that will be used and loved for years to come. You can be confident that with Gantri, you will not only receive a stylish, budget-friendly Wall Light upon purchase, but one that will also save you money in the long-run with its energy efficient bulbs and no-mess installation. Whether you choose the Gio, Signal or another Gantri Wall Light, you will always receive a piece that is kind to your wallet, your eyes, and the walls of your home.